Momik automates lighting design in Revit. Fully NRC/IES compliant. Weeks of work in minutes.
What takes weeks manually, Momik does in minutes. Fully automated lighting layout in Revit.
Every design meets NRC/IES requirements automatically. No manual norm-checking needed.
Works directly inside Autodesk Revit. No exports, no external tools, no workflow disruption.
AI-powered clash detection ensures every fixture placement is structurally valid from the start.
Reference lux levels, uniformity ratios, UGR limits, and colour rendering requirements per room type under NRC/IES.
| Room / Task Type | Illuminance (Em) | Uniformity (Uo) | Glare (UGR) | Colour (Ra) |
|---|---|---|---|---|
| Open-plan office | 500 lx | ≥ 0.70 | ≤ 19 | ≥ 80 |
| Meeting / conference room | 300 lx | ≥ 0.60 | ≤ 22 | ≥ 80 |
| Reception / lobby | 300 lx | ≥ 0.40 | ≤ 22 | ≥ 80 |
| Corridor / circulation | 100 lx | ≥ 0.40 | — | ≥ 60 |
| Staircase | 100 lx | ≥ 0.40 | — | ≥ 60 |
| Toilet / WC | 200 lx | ≥ 0.40 | ≤ 25 | ≥ 80 |
| Warehouse (general) | 200 lx | ≥ 0.40 | — | ≥ 60 |
| Manufacturing (med. prec.) | 500 lx | ≥ 0.60 | ≤ 22 | ≥ 80 |
In Canada, NRC/IES establishes the technical standard for workplace lighting design. Compliance is enforced by Provincial OHS Authorities / NRC under National Building Code of Canada. Commercial and industrial projects must include lighting calculations in building permit documentation. Inspectors verify that illuminance levels meet minimum requirements during occupancy inspections. Non-compliance can expose building owners and employers to regulatory penalties and occupational health liability.
Primary industries where NRC/IES compliance is most frequently required in Canada.
In Canada, NRC/IES is referenced by Provincial OHS Authorities / NRC as the applicable technical standard under National Building Code of Canada. Compliance is de facto required for commercial and industrial building permit approval. Non-compliance with referenced standards creates liability exposure under occupational health and safety law.
Buildings that fail to meet minimum illuminance levels can receive corrective action notices from Provincial OHS Authorities / NRC. In regulated sectors — healthcare, education, industrial — inspectors have authority to halt operations until deficiencies are corrected. Beyond regulatory risk, poor lighting increases worker injury rates and associated liability costs.
Momik reads your Revit model room by room, automatically applies NRC/IES illuminance targets for each space type, calculates the correct fixture placement, quantity, and layout, and generates a fully compliant lighting design — entirely within Revit. No manual lux calculations, no spreadsheets, no cross-referencing the norm tables. Typical projects are completed in under five minutes.